Business Logistics

Trusses In Corrosive Environments

Question: 

I am a building designer on a salt storage building project. I would like to use metal plate connected wood trusses in the design. What should I specify for the metal connector plates?

Wood Framing

Question: 

I am conducting an investigation on the costs associated with building a 15,000 sq. ft. addition to an existing school building. I need to determine if wood trusses, steel bar joists or light gauge steel trusses would be the most economical material for the building system. The truss spans range from 42 ft. to 56 ft.

Building A Garage With A Bedroom And Bathroom

Question: 

We are building a garage with a bedroom and bathroom and trying to find out what type of floor joists and roof trusses to use. The garage will be a 26 ft. by 32 ft. with a 26 ft. by 32 ft. room upstairs. But we don't want to have posts in the middle of the garage to help support the weight of the second floor.

Floor Trusses With Masonry Bearing Walls

Question: 

We would like to know if there is a problem with using wood floor trusses with masonry bearing walls without a ledger. Our local supplier has told me that encasing the wood truss in the masonry wall could be detrimental to the truss due to moisture. What, if any, suggestions do you have for this condition? If a bottom chord bearing is used, do the trusses need fire cuts? The two-story building contains masonry bearing walls with wood trusses on the second floor and wood trusses at the roof.

Topping Off Ceremony

Question: 

What is the history of the topping off or topping out ceremony when the top floor is completed and a tree is placed on the roof?

Turb O Webs

Question: 

We have been using Turb-O-Webs for about four months. We are very happy with their performance, although there have been a few ripples along the way. The main thing that concerns me at present is the need for performance documentation and testing data. Do you have anything that will help, or know of people or organizations that could offer assistance?

Information On Floor Trusses

Question: 

I am researching building products for a new home and I wanted to use metal plate connected floor trusses. When I took my plans to the builder, they cautioned me against using these floor trusses. They stated that they were not engineered products, they do not carry any kind of warranty, and they do not know how long they last over time. My basement span is 30 ft., they said trusses could not span 30 ft. I really would like to use floor trusses, but now I am unsure. Could you offer any information?

Use Of Metal Plate Connected Wood Trusses In IBC Jurisdictions

Question: 

IBC 2012/2015 2303.4.6 and IBC 2012/2015 2303.4.7 state: 
2303.4.6 TPI 1 specifications. In addition to Sections 2303.4.1 through 2303.4.5, the design, manufacture and quality assurance of metal-plate-connected wood trusses shall be in accordance with TPI 1. Job-site inspections shall be in compliance with Section 110.4, as applicable.

Size Of A Room In An Attic Truss

Question: 

Does SBCA have any guidelines regarding the size of a room in an attic truss? I have used a formula, length of room in inches divided by the depth of the bottom chord equaling less than 22. I was curious if any extensive studies or published articles giving more exact guidelines are available.

Designing Trusses

Question: 

I'm looking for a book that will provide formulas and design criteria for trusses. Can you give me any suggestions of where to find a book or fairly inexpensive software?