Construction

Partition Separation Lag Bolting

Question: 

Is lag bolting the bottom chord of a truss to the top plate of a wall a proper fix to correct truss arching, assuming the attic is properly vented?

Substituting Fire Rated Wood Truss Assemblies For Light Gauge Steel

Question: 

We recently received bids on a school project, which referenced UL P523. This assembly used light-gauge steel trusses. We noted on the drawing that we could accept an alternate design using wood trusses in lieu of light-gauge steel framing, if the alternate design could meet the fire ratings.

Valley Sets

Question: 

What are the requirements for installing valley sets over roof trusses? I am interested in nailing and support conditions. Some engineers ask for the bottom chord of the valley truss to be ripped to match the roof pitch of the underlying trusses. Is this necessary? How can I calculate values for uplift resistance for the building inspector?

Installing Valley Sets

Question: 

What are the requirements for installing “valley set” overlay roof trusses? I am interested in nailing and support conditions. Some engineers ask for the bottom chord of the valley truss to be ripped to match the roof pitch of the underlying trusses. Is this necessary?

Responsibilities With Lumberyards

Question: 

When you’re selling trusses through a lumberyard and the contractor calls to say that the “trusses don't fit correctly,” who has the ultimate responsibility for the trusses? I argue that the lumberyard is responsible since we have provided them with all the information on how the job was designed, even though they may or may not have passed this information on to the contractor.

Roof Truss Nailing With Hurricane Clips

Question: 

If you use hurricane clips to secure roof trusses from uplift, are you allowed to use fewer than the typical three nails in the bearing heel of the roof truss? I am concerned because we want to do the right fastening schedule, but three nails in addition to the hurricane clip splits the wood. What is the standard recommendation?

Truss Repairability

Question: 

Occasionally we deal with truss failures due to impact and or crushing forces such as trees falling onto roof structures. At what point can the truss no longer be repaired? Also, what should an adjuster look for when determining repair-ability? Or should a storm adjuster basically punt and call a consultant for every truss failure?

Why Are Some Design Choices Better than Others?

Dan Morris—a field service engineer at Apex Technology—and Kelly LaBlance—a technical manager with Builders FirstSource—are both convinced that developing and maintaining a design QC process has helped their companies. Their expertise in analyzing designs and finding creative solutions to solve or even prevent problems was on display as they guided BCMC attendees through common design mistakes and the issues they cause in the field. 

Long Span Truss Installation

Long span trusses can pose significant risk to installers. The dimensions and weight of a long span truss can create instability, buckling and collapse of one or many trusses, if not handled, installed, restrained and braced properly. As such, they require more detailed safety and handling measures than shorter span trusses. This research report provides guidelines for proper handling and installation of long span trusses for both wood and cold-formed steel.

Gypsum Joint Ridging and Cracking

Drywall cracking and ridging are typical problems seen in ceilings and walls of homes. Sometimes, both of these issues appear at the same location, with cracking appearing in wetter months and ridging in drier months. This problem has become more widespread as homeowners insist on larger rooms and open floor plans that have large clear span areas. This Research Report evaluates local environment changes that play a significant role in every gypsum ridging and cracking case.