Search
“All the builders and framers I talk to out there say the same thing: they can’t find enough guys to do what they want to do.” Those are the thoughts of Jason Blenker, president of Blenker Building Systems. If national surveys and media reports are accurate, the sentiment is shared by most of the construction industry across the country.
Established in 1983, the Structural Building Components Association (SBCA) is the only international trade association representing manufacturers of structural building components. Its membership also includes truss plate suppliers, original equipment manufacturers and resellers, computer software companies, lumber suppliers, builders and professional individuals in the fields of engineering, marketing and management.
- The 2006 IRC changes that apply to roof framing or roof trusses include: R301.5 attic loading; R802.10.2.1 snow loading; R802.10.3/R502.11.2 reference to BCSI; R802.3.1 rafter/ceiling joist connections; and R806.4 conditioned attic spaces.
- The 2006 IRC changes that apply to wall panels include: R302, R309 exterior wall; R317 unit separation; R502.2.1 load path through floor at braced wall lines; R602.3.2 wall plate splices; R602.10 braced wall lines; and R703 exterior wall covering and fasteners.
SBCA’s Cold-Formed Steel Council (CFSC) provides supporting documentation relating to Cold-formed steel (CFS) truss quality control.
SBCA is involved with “In-plant Quality Control” programs to fulfill its mission of members gaining the knowledge and power to run successful, growing, profitable companies offering a compelling competitive advantage in the marketplace for their customers and professional growth for employees.
SBCA has published extensive information regarding raw material performance characteristics, since 2009, when SBCRI first learned of the disparities between OSB and lumber published design values and SBCRI tested performance. We published a 2015 article entitled “ Why is SBCA & SBCRI Publishing Investigative Reports? ”
It’s about knowing your customers’ pain points and solving them.
Getting information up front on sprinkler systems can ease the design process.
why accurate design values are so vital to structural design.
Introduction: Why the Interior Finish Installation Is Important
Read more about membership with the Structural Building Components Association (SBCA) and determine membership dues.
I’m honored to serve as SBCA’s new executive director.
Building Designers need to account for the dead and live loads of fire sprinkler systems, in addition to the other load requirements imposed under the model building codes. Truss Designers are responsible for incorporating the additional load from the fire sprinkler systems into the truss design. The information in this Research Report is applicable to both floor and roof systems. Only vertical loads from fire sprinkler systems are discussed; lateral loads, where required, should be evaluated separately by a Registered Design Professional.
Builders Warehouse Manufacturing • Aurora, Colorado
Since I started in this industry a year ago, I have realized there are three major issues that the construction industry is facing: lack of skilled labor, lack of time, and lack of money. Fortunately, components manufacturers (CMs) provide a solution to all three.
I got into the industry by starting out in retail lumber with Wickes. They had a yard near my house and in high school I cleaned the facility and stocked the shelves.
SBCA’s partnership with Tim helps educate his followers on the benefits of structural components.
JL Schwieters was started in 1980 by my dad, John Schwieters, and his brother, Leo, as a framing labor business.
Component Manufacturers - These companies manufacture and sell trusses, wall panels, related structural components and/or subcomponents.
Associate Members - These companies supply products, equipment, machinery or services to Component Manufacturers. This category includes professional members.
The EPA is seeking nominations for individuals to serve on its new Science Advisory Committee on Chemicals to advise the EPA on risk assessments and TSCA implementation.
2012 International Residential Code
Chapter 5 Floors (search for R501.3)
- When the IRC provides a solution that cannot be supported by testing of real buildings in a code-compliant application of braced walls, more accurate and technically correct engineered solutions will never be able to compete.
- There is some resistance in the market to establishing standard factors for product equivalency or system performance because it may result in non-wood products graining an advantage over traditional OSB market share.
- A top testing priority for SBCA is “Framing the American Dream III,” which seeks to test a typical stick framed roof and compare its performance to an identical engineered truss roof.
In May of 2018, Door Creek Church broke ground on their new DeForest Campus just minutes north of Madison, Wisconsin. The church was given ten acres by a local developer in what amounts to a suburb of Madison on the edge of urban reach mixed with strong agricultural ties. Originally, a metal building was designed for the church but costs redirected the church’s architect to wood frame construction.
- A quarter of a million people left the housing construction industry from 2002-2012, and many of them have found employment elsewhere.
- Framers are feeling the effects of this exodus more acutely than most, prompting them to look for creative ways to do more with fewer people.
- CMs can play a pivotal role in switching framers from sticks to components by offering installation training and expertise to new framing employees.
A decade after it began operation, SBCRI is making a new push for industry-directed testing to benefit all component manufacturers.
- Combining fiber reinforcement with finger jointed lumber could be a win for both the lumber and component industries.
- With in-line framing, CMs can remove studs and plate material, and spread the stud spacing out to 24", which, in some cases, allows for better insulation methods.
- The key to new product development is generating sales revenue immediately by establishing design values and engineering reports that give assurance of the product’s equivalent code-compliant performance.
Having a voice and a united group of CMs to drive the industry forward is one of the primary reasons for belonging to our trade association.
Have you ever wished SBC Magazine had a brief summary of the great stuff inside each issue? Your wish has been granted! This year we are giving Jess Lohse (Rocky Mountain Truss) an advanced copy of the magazine each month and asking him to write down his thoughts about what he reads. Thanks, Jess, for giving us your CM perspective!