Search
Explore the two different methods used to calculate a wall panel’s capacity to resist applied lateral loads.
- Being purchased by their biggest customer allowed Plum Building Systems to forge an even more positive relationship with closer, more effective communication.
- Building partnerships with other complementary organization can benefit everyone in the supply chain.
- A collective commitment to service can produce a greater impact in the community when companies join forces.
- Manufacturing rough openings in a plant improves site placement accuracy efficiency dues to consistent framing every time.
- Componentized wall sections also significantly reduce jobsite waste and allow for the use of alternative header approaches and materials.
- Having the ability to deliver components just in time to urban jobsites alleviates the need for hard-to-find storage and staging areas.
- CMs engaged in NFC membership de-velopment efforts will find their work rewarded with better organized, safer, more effective and more reliable framing crews.
- Framers engaged in NFC will learn component installation best practices from other framers, with the goal of creating more efficient, safe and profitable framing outcomes.
- By actively growing awareness of and membership in NFC, CMs will expand their framing community connections and naturally expand market share and revenue growth.
- By conducting its own ASTM E119 floor assembly fire testing, SBCA has the data it needs to effectively fight the controversial IRC Section R501.3 code provision and help preserve CMs’ market share.
- SBCA has drafted template best practice language CMs should consider using in their TDDs, customer contracts and submittal documents to counter the efforts of the lumber industry to shift liability onto end users.
- Through Framing the American Dream and WorkForce Development efforts, SBCA is actively engaged in helping CMs successfully navigate today’s labor challenges and grow their businesses.
- A quarter of a million people left the housing construction industry from 2002-2012, and many of them have found employment elsewhere.
- Framers are feeling the effects of this exodus more acutely than most, prompting them to look for creative ways to do more with fewer people.
- CMs can play a pivotal role in switching framers from sticks to components by offering installation training and expertise to new framing employees.
Editor’s Note: The purpose of this article series is to identify truss-related structural issues sometimes missed due to the day-in and day-out demands of truss design/production and the fragmented building design review and approval process. This series will explore issues in the building market that are not normally focused upon, and provide recommended best-practice guidance.
Consider for a moment the basics of manufacturing a truss. Based on SBCA’s 2012 Financial Performance Survey, lumber accounts for roughly 40 percent of the total cost. Plates account for about eight percent of the total cost. Design and production labor account for 30 percent, and delivery, sales and overhead account for the remaining 22 percent (these are rough industry averages). All other things being equal, if you could decrease your lumber costs by a few percentage points while raising your plate costs a small amount, would you take the trade-off?
- A series of test concepts have been suggested. SBCA needs your input on these concepts to ensure the industry testing conducted in SBCRI helps improve market opportunities for CMs.
- The goal of industry testing in SBCRI is to tackle the daily design and framing challenges CMs see, and find solutions that make components even more reliable and cost effective.
- SBCRI was developed and built specifically for this purpose.
- Today’s complex truss designs can present significant installation challenges to framers if there isn’t good communication between the framer and the manufacturer.
- From storage and lifting pick points to critical bearing conditions, safe handling and installation practices need to be effectively communicated to installers.
- During the design phase, manufacturers can help ensure smooth installation by considering the framing challenges a complex design may create and facilitate cross communication between parties.
When it comes to getting the right structural building components for a project, cost isn’t everything, but how do you convince the building designer? Communication is key.
Truss industry standard of care items are contained throughout ANSI/TPI 1,* The National Standard for Metal Plate Connected Wood Truss Construction. The focus of this article is ANSI/TPI 1 Chapter 2, Section 2.3.5.1 and companion Section 2.4.5.1, which require a truss designer to prepare truss design drawings (TDD) based on design criteria and requirements set forth in the construction documents. The truss industry should expect to get this information from the building designer (BD), which may include the building owner, contractor or a registered design professional (RDP). Particularly when there is an RDP for the building, the design community expects the truss industry to design components that conform to the truss framing plan and specified design parameters within the construction documents, unless instructed otherwise in writing.
- There are many published installation guides available for product-specific applications, but few account for framing tolerances when dissimilar materials are integrated into the overall building and the expectations for overall performance.
- NFC’s Standards Development Sub-committee will begin outlining framing practices performed everyday where tolerances and known good performance have not been detailed in depth.
- The subcommittee will take a “through the eyes of a framer” point of view and provide step-by-step implementation guidelines and options.
A look at safe and proper handling and storage
SBCRI Testing & SBCA Research Reports can transform your market.
The first two Standard of Care articles discussed deferred submittals and truss-to-truss connections. This article explores truss minimum required bearing width issues from the perspective of the design community.
- A lot has changed in the components industry over the past two decades, and a new Framing the American Dream (FAD) project would allow us to quantify just how much, as well as detail our product’s benefits over other framing methods.
- Beyond FAD, SBCA is also focusing on helping component manufacturers across the country fight an unfair provision in the model building code, R501.3.
- As you think about investing in the future of your business, think about how much you’re willing to invest this year in these two projects to ensure a bright future for our industry.
- You must have continuous training in order to have a training system work.
- In addition to FrameSAFE and Toolbox Talks, NFC will release FrameSAFE Safety Posters in early 2015.
- FrameSAFE is more than just a safety manual; we’ve created it to be a training tool that workers and employers can use to find everything they need in one product.
While one of the most critical concerns in a manufacturing facility, machine guarding isn’t as simple or easy as it sounds.
Good truck drivers make good decisions.
- When there’s no effective tie-off point for a building, framers have to use a job-specific best practices approach.
- Both Hull and Shifflett agree it is in the best interest of component manufacturers to work with framers to create best practice approaches to fall protection.
- The long-term goal is to host an online database that GCs and framing teams can visit to know who in their industry participates, trains and follows the same safety guidelines.