Search
- Sending a Jobsite Package with each truss delivery is a good way to share safe installation and bracing recommendations with framers.
- In the near future, SBCA is committed using SBCRI testing to optimize BCSI guidelines.
- We hope to change bracing design by combining temporary and permanent bracing into one step.
- Information about installation tolerances can be found in the B1 Summary Sheet.
- SBCA members can use wfd.sbcindustry.com to post jobs and review résumés—free!
- Devote 15 minutes every week to look at SBCA’s resources, read Industry News Headlines and catch up on email.
- Standard metal connector plates are suitable for use in lumber with moisture content of 19 percent or less and in building applications with no exposure to corrosive substances.
- Connector plates used in trusses exposed to high humidity or caustic chemicals may need to be treated to prevent corrosion.
- A variety of protective coatings can be applied to truss places in situations where special protection is necessary.
- It is critical to reinforce basic saw safety techniques like wearing PPE, housekeeping and machine guarding regardless of skill level or experience.
- Remember to have concentration and patience when operating any saw.
- Take a proactive approach to preventing injuries by properly maintaining all saws.
(includes corrected tables for print version)
- The biggest obstacle in selling panels has always been getting builders framers to recognize the value.
- Different market segments require unique skill sets just like different products do.
- Given the ultra-competitive market, strategic planning is critical for component manufacturers in 2011.
- There is often confusion in the marketplace about what criteria must be met to accept a new product and approve it for use in the intended application.
- The IBC and IRC require products not approved within the code to be “at least the equivalent of that prescribed in this code in quality, strength, effectiveness, fire resistance, durability and safety.”
- Manufacturers of products that do not have span tables or design values listed inside the IRC and/or IBC must provide design values for their products through independent testing.
- Build
Don't miss all that this year's show has to offer in New Orleans!
Affecting more than 20 states, the scope of Hurricane Sandy, and the rebuilding efforts underway and yet to come, are difficult to imagine.
If you knew Bob Halteman, founder of Wood Truss Systems, or ever interacted with him, you knew he wasn’t a salesman. Sure, his job (and the purpose of his company) was to sell fabrication equipment to the structural components industry, but he wasn’t in sales. He was in solutions.
Components play an integral role in the structural integrity of a building, but in this case, they’re used purely for aesthetics. For the remodel of a Summit Credit Union’s “Inspiration Branch,” removable façades were built inside the lobby to represent financial and life goals dealing with travel, education and home ownership.
Congratulations to Cascade Lumber Company, which celebrated its 60th anniversary in May.
It’s a beautiful sight—trusses being braced properly, of course. That’s what Bob Dayhoff of Shelter Systems Limited and Chair of SBCA’s E&T Committee saw while celebrating his 32nd wedding anniversary with his wife in Hawaii. “It was a welcome sight to see prefabricated trusses being used in construction and being safely erected and correctly braced to boot!” said Dayhoff.
When the new Bell Park Pavilion in Greenwood, AR, needed a roof, Capital Structures provided a solution with these glulam beam trusses.
Don't miss all that this year's show has to offer in San Antonio!
BCMC attendees brought their athletic skills to the BCMC show in San Antonio.
To save you time and money, SBCA’s Wood Truss QC Program staff are going from on-site to on-call.
Technical backgrounds aren't mandatory for students entering the industry with Grizzly Truss.
"Work safely. Go home Safely." An expanded version of NFC’s FrameSAFE Safety Manual template was rolled out this spring and is taking hold in the marketplace.
Meet the chair of SBCA's IT Committee: Greg Dahlstrom, IT/IS Manager at Villaume Industries, Inc.
If you’re one of the hundreds of component manufacturers (CMs) currently challenged by finding and retaining a large enough skilled workforce to accomplish your business goals, there are no wrong answers to these questions. The only strategy to avoid is making decisions without good information.
SBCA has developed an online series of best practice design and installation guides on a wide variety of topics.